This shows you the differences between two versions of the page.
Both sides previous revision Previous revision | |||
projects:balloon:balloonmark5 [2014/08/09 08:37] kd2eat [Lessons Learned] |
projects:balloon:balloonmark5 [2014/08/09 08:38] (current) kd2eat [Lessons Learned] |
||
---|---|---|---|
Line 169: | Line 169: | ||
===== Lessons Learned ===== | ===== Lessons Learned ===== | ||
- | - Ordered List ItemThe tracker had some issues. They need to be resolved prior to the next flight. | + | - The tracker had some issues with reboots. They need to be resolved prior to the next flight. |
- The 150g balloons apparently have quite a bit of variability in burst altitude! That was a surprise. | - The 150g balloons apparently have quite a bit of variability in burst altitude! That was a surprise. | ||
- Although the parachute predictor estimated a descent rate of about 6 m/s, we rounded up to 8 based on previous experience with the balloon remains interfering with the parachute function. The observed descent rate was 8.9 m/s. We could have rounded even higher. | - Although the parachute predictor estimated a descent rate of about 6 m/s, we rounded up to 8 based on previous experience with the balloon remains interfering with the parachute function. The observed descent rate was 8.9 m/s. We could have rounded even higher. | ||
- In future, we might want to use a larger chute than recommended to temper the descent rate, or find a means to jettison the balloon remains after burst. | - In future, we might want to use a larger chute than recommended to temper the descent rate, or find a means to jettison the balloon remains after burst. |