THIS IS INCOMPLETE. MORE TO COME SOON.
Design Gin Pole to assist in the raising of the Delta-4XL for repairs:
This page will outline the design process of the Gin Pole. Please leave comments or send me an email at email@example.com with any feedback you might have.
Safety Factor according for OSHA and Los Alamos National Lab: 5:1
We will go with a 10:1 safety factor.
See uploaded document for back of the napkin calculations.
Cantilever Analysis_Von Misses
1) All gin pole, and both gin pole holders will be pulled up together. Two bolts on each holder will be taken out of each holder so that it can be placed onto the pre-existing structure easily.
2) Remaining bolts will be put into place so that it is clamped onto pre-existing structure.
3) Gin Pole will slide upwards through holders. Holders will act as guide when moving gin pole upwards.